Tekway 300MM Professional Grade Automotive Puller Dent Repairer Grapple Puller manufacturers From China | Tekway

By dent repair car puller, you may be referring to the tool used to remove dents from car body panels. A common type

of dent remover is a suction cup remover, which uses vacuum pressure to pull out dents. Another type is a sliding

hammer or dent puller kit, which includes a sliding weight that attaches to the dent with various attachments and then

pulls, causing the dent to pop out. A professional-grade instrument puller is now launched, which uses a hydraulic

hook to easily control the pulling force and accuracy, making this work easier.

To use a suction cup dent remover, follow these steps:

1. Clean the surface around the dent to ensure good suction.

2. Moisten the suction cup to improve sealing.

3. Place the suction cup on the indentation and press it firmly against the surface.

4. Use label heating glue to stick to the indentation

5. Install the hook and connect the label, hold the handle slowly and steadily, tighten the groove upward under force and pull out the dent.

6. Continue to pull until the dent is completely removed and repaired.

For a slide hammer or dent puller kit, the steps may vary depending on the specific tool, but generally, you'll need:

1. Select the appropriate attachment for your dent puller tool.

2. Secure the chosen tool to the indentation by screwing or using adhesive.

3. Hold the handle of the slide hammer and strike hard to apply force to the attachment.

4. Repeat the process, adjusting the position of the tool as needed, until the dent is pulled out.

It’s worth noting that dent repair can be a complex process and the effectiveness of these tools may vary depending

on the size and severity of the dent. It’s recommended to consult the supplier for recommendations and explanations

before purchasing.